|
Details:
Modulair™ Manifold Sets provide pre-engineered piping between Modulair™ Fluid Coolers and Modulair™ Pump Skids for cooling of water, ethylene glycol/water, and propylene glycol/water solutions in a variety of closed loop applications. The manifolds are designed to provide the pipe connections from the pump skid to the fluid coolers, and from the fluid coolers to the outlet connection(s). Colmac Modulair™ Manifolds are available in a series of combinations to suit the full flow range of each pump skid size. The manifolds offer designs for one or two fluid coolers for the MOD 100 and 150 Pump Skids, two or three fluid coolers for the MOD 200 Pump Skid, and three or four fluid coolers for the MOD 250 Pump Skid. Modulair™ Fluid Coolers may be arranged in a row (side by side), or end to end with the pump skid at the center, in left hand or right hand configurations. The multiple arrangements available provide maximum flexibility for the layout of the cooling system in any application. Manifold features include a wide range of combinations and sizes to suit the full flow range of Modulair™ Pump Skids. Pre-engineered designs provide plot plans and footing locations for each arrangement. Welded carbon steel piping is fabricated to ASME B31.1 with header manifolds to ASME VIII. Designed for 150 psig at 200 degrees F. with carbon steel ANSI 150 lb. RF flange connections. Piping is cleaned and painted with primer and one coat of enamel; ends are covered for shipment. Cooler manifold headers are factory pre-fabricated and shipped in one piece. Connections to the pump skid are designated as field welds for final alignment. Isolating butterfly valves for the air cooler connections are available as an optional extra. Overall pilot plan dimensions allow for the addition of valves
|
|
